Xerox DocuPrint 4517 User Manual

Contents

S p e c i a l F e a t u r e sC h a p t e r 1 : D o c u P r i n t 4 5 1 7 Q u i c k T o u r v 1-7Edge to EdgePrintingFor those instances when you need to print PCL 5e Emulation(hereafter referred to as PCL) jobs all the way to the edge ofthe page, turn on the Edge to Edge option in the PCL EmulatMenu. Edge to edge printing is always available forPostScript jobs and requires no setting. Just format yourdocument to the edge of the page.See Chapter 3: Using the Control Panel for instructions onchanging Control Panel settings.Automatic TraySwitchingThe DocuPrint 4517 allows you to set automatic trayswitching for both PCL and PostScript (when PostScript isinstalled) jobs. When tray switching is on, and the paper trayruns out of paper, the printer automatically switches toanother paper tray (if another tray is loaded with the samesize paper). That means you don’t have to load paper as often.You can also install one or two optional 500-sheet Paper Deckand Cassettes (lower trays), or the 2,000-sheet High CapacityFeeder, to extend your printing capacity.For more information on tray switching, see the section“Automatic Tray Switching” (page 2-18) in Chapter 2: PaperHandling.AutomaticLanguage Sensingand SwitchingWhen you have installed the PostScript option, the printer canprocess both PCL and PostScript jobs. When the printer’sLanguage Sensing option is on, the DocuPrint 4517 samplesthe incoming data stream to determine which language theprint job requires. The DocuPrint 4517 then switches to theproper language for that job.The DocuPrint 4517 can have up to three active ports whenyou install two optional network interface cards. Turn theLanguage Sensing option on for all the ports, and the printerautomatically samples each print job and switches to theappropriate processing language.For more information about language sensing and switching,see Appendix D: Control Panel Options.hapter1.frm Page 7 Friday, July 11, 1997 8:12 PM