JOB CONTROL TASKS4-2 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDEJob control tasksYou can activate job control tasks by entering commands through thekeyboardThe following sections contain instructions for performing specific jobcontrol tasks.AbortUse this task to do one of the following:• Remove a specific print job from the system• Remove the print job currently being processed• Cause the current print job to stop printing (printing continueswith the next report)• Cause the currently active nonprint task (such as FDL or PDL)to abort (there must be no active print jobs when this commandis entered).Abort task To remove a specific print job from the system, enter the followingcommand:ABORTjob-idTable 4-1 lists the parameter and its description.To cause the current job to stop printing, enter the followingcommand:ABORT OTo remove the print job currently being input into the system, enterthe following command:ABORT ITo abort a nonprint task (such as FDL or PDL), enter the followingcommand:ABORTFor this command to work, there must be no print jobs active at thetime it is entered. If there is an active print job, the following messageappears:OS1190 INVALID PARAMETER, COMMAND IGNOREDTable 4-1. ABORT command parameter and descriptionParameter Descriptionjob-id The name of the job you want to abort.
