MAINTENANCE TASKS10-22 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDECaution: For the above paper sizes, the standard transfer assistblade must be used.Caution: To avoid damage to the photoreceptor, you must performthe Set Tray Size task explained in the “Status and print tasks”chapter.Installing the custom transfer assist bladeThe custom transfer assist blade comes in a package containingdetailed instructions. Be sure to follow the instructions carefully.Caution: To prevent damage to the LPS, have your servicerepresentative show you the procedure before you attempt tocustomize and install a custom transfer assist blade for the first time.Setting tray size with the custom transfer assist bladesWhen you are using the custom transfer assist blade, you must setthe tray length differently than described in the “Set tray size” sectionof the “Status and print tasks” chapter. Use tables 10-1 and 10-2 todetermine the tray length setting to use.Note: Set the tray width to the width of the custom paper.Table 10-1. Tray length settings for custom transfer assistblades (U.S. markets)Paper size Set tray size to...11.5 to 11.7 inches/292 to 297 mm 11.7 inches/297 mm12.1 to 12.9 inches/307 to 328 mm 13 inches/330 mm13 to 13.9 inches/330 to 353 mm 14 inches/356 mmTable 10-2. Tray length settings for custom transfer assistblades (Non-U.S. markets)Paper size Set tray size to...10 to 10.9 inches/254 to 277 mm 11 inches/279 mm11.5 to 11.6 inches/292 to 294 mm 11.7 inches/297 mm12.1 to 12.9 inches/307 to 328 mm 13 inches/330 mm
