STATUS AND PRINT TASKS8-6 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDETray loadingUse the Tray Loading task to respond to system messagesconcerning stockset problems for the current print job.Tray Loading task Perform the following steps:Step 1. When a print job calls for a stock change, the existing clusters appearon the system controller display. The current trays field is blank forundefined clusters.Refer to the following example.Step 2. Load the correct stock in the correct trays.Step 3. To define the current trays for the undefined cluster, enter thefollowing command:CLUSTERcl-name tray numberTable 8-1 lists each parameter and its description.ClustersUse the Clusters task to:• Display all the clusters in the system with their preferred andcurrent trays• Define new clusters• Edit preferred or current trays for existing clusters.Note: You must define tray contents to the LPS when youchange the stock in a tray being used by the current stocksetwithout being prompted by the system to change the stock inthat tray.Clusters task To display all clusters in the system, enter the following command:CLUSTERBLUE ASIZ ----PREFER---1 3----CURRENT---1 3---STATUS---HAS TRAYSGREEN ASIZ ---PREFER---2---CURRENT--- ---STATUS---IS DEFINEDTable 8-1. CLUSTER command parameters and descriptionsParameter Descriptioncl-name Disables only the steady mode of the Attentionlight.tray number The tray(s) in which stock for the cluster iscurrently loaded.
