3.9 Operating the Storage Device3-603.9 Operating the Storage DeviceThe printer supports three types of storage device; memory card, option hard disk, andRAM disk. The memory card and option hard disk are installed into the dedicated slots ofthe printer. The RAM disk is an allocated part of the printer’s memory. If the optional harddisk is installed in the printer, the e-MPS function will be available. For details, see e-MPSon page 3-20.The basic operations of each storage device are the same. This section mainly explains theoperation of the memory card.3.9.1 Using the Memory CardThe printer is equipped with a slot for a memory card. By inserting a memory card into theprinter, the following operations become available.• Reading Font Data• Reading Data• Writing Data• Deleting Data• Formatting Memory Card• Printing a List of Data NamesFor details about the handling of the memory card, see Appendix A Options, section A.3.1Memory Card on page A-7.Reading Font DataIn case of a memory card if a memory with the font data card is already inserted into the slotwhen the printer is turned on, the fonts are automatically read into the printer. To read fontsinto the printer from a memory card, proceed as follows.1111 Press the MENU key.2222 Press the U or V key repeatedly until Memory Card > appears.3333 Press the Z key.4444 Press the U or V key repeatedly until >Read Fonts appears.5555 Press the ENTER key. A question mark (?) appears.Memory Card >>Read Fonts>Read Fonts ?
