xiiiPrecautions for UseCautions when Using the PrinterWARNING• DO NOT place metallic objects or containers with water (flower vases, flower pots, cups, etc.)on or near the printer. This type of situation presents a danger of fire or electrical shock shouldthey fall inside. .............................................................................................................• DO NOT remove any of the covers from the printer as there is a danger of electrical shock fromhigh voltage parts inside the printer. ................................................................................• DO NOT damage, break or attempt to repair the power cord. DO NOT place heavy objects onthe cord, pull it, bend it unnecessarily or cause any other type of damage.These types of situa-tions present a danger of fire or electrical shock. ...............................................................• NEVER attempt to repair or disassemble the printer or its parts as there is a danger of fire,electrical shock or damage to the laser. If the laser beam escapes, there is a danger of it causingblindness. ....................................................................................................................• If the printer becomes excessively hot, smoke appears from the printer, there is an odd smell,or any other abnormal situation occurs, there is a danger of fire or electrical shock. Turn thepower switch OFF ({) immediately, remove the power plug from the outlet and contact yourservice representative. ...................................................................................................• If anything harmful (paper clips, water, other fluids, etc.) falls into the printer, turn the powerswitch OFF ({) immediately. Next, remove the power plug from the outlet to avoid the dangerof fire or electrical shock. Then contact your service representative. ...................................• DO NOT remove or connect the power plug with wet hands, as there is a danger of electricalshock. .........................................................................................................................• ALWAYS contact your service representative for maintenance or repair of internal parts. ......CAUTION• DO NOT pull the power cord when removing it from the outlet. If the power cord is pulled, thewires may become broken and there is a danger of fire or electrical shock. (ALWAYS grasp thepower plug when removing the power cord from the outlet.) ..............................................• ALWAYS remove the power plug from the outlet when moving the printer. If the power cord isdamaged, there is a danger of fire or electrical shock. ........................................................• If the printer will not be used for a short period of time (overnight, etc.), turn the power switchOFF ({). If it will not be used for an extended period of time (vacations, etc.), remove the powerplug from the outlet for safety purposes during the time the printer is not in use. ...................• For safety purposes. ALWAYS remove the power plug from the outlet when performing clean-ing operations. .............................................................................................................• If dust accumulates within the printer, there is a danger of fire or other trouble. It is thereforerecommended that you consult with your service representative in regard to cleaning of internalparts. This is particularly effective if accomplished prior to seasons of high humidity. Consultwith your service representative in regard to the cost of cleaning the internal parts of the printer.