3.6 Making Default Settings3-433.6.2 KC-GL Pen Width and ColorThe KC-GL emulation mode enables you to set the pen widths in dots, individual pen colorsfor pen numbers 1 to 8, and the KC-GL page size.1111 Press the MENU key.2222 Press the U or V key repeatedly until Emulation appears on the message display.3333 If the current emulation is other than KC-GL, press the ENTER key. A blinkingquestion mark (?) appears.4444 Press the U or V key repeatedly until KC-GL appears. Press the ENTER key.5555 Press the Z key to move to the >KC-GL Pen Adjust> submenu. To change thepen width and/or pen color, press the ENTER key. A blinking question mark (?)appears.6666 Press the U or V key repeatedly until the desired pen number of 1 to 8 appears.When the desired pen number is displayed, press the ENTER key.7777 To change the pen width, press the Z key, then press the ENTER key. A blinkingcursor appears at the width value.8888 Press the U or V key repeatedly until the desired pen width in dots (00 to 99)appears. When the desired pen width is displayed, press the ENTER key.9999 To set the pen color, press the U or V key. To change the pen color, press theENTER key. A blinking question mark (?) appears.10101010 Press the U or V key repeatedly until the desired pen color (Black, Red, Green,Yellow, Blue, Magenta, Cyan, White) appears. When the desired pen color isdisplayed, press the ENTER key.11111111 To set the KC-GL page size, press the Y key twice, then Press the U or V key until>KC-GL Page Set is displayed.Emulation >KC-GL>KC-GL PenAdjust ? Pen (1)>>Pen(1) Width02 dot(s)>>Pen(1) Color? Black
