3.4 e-MPS3-21Job StorageJob storage stores print jobs either temporarily or permanently, or in virtual mailboxes, asyou click an appropriate radio button on the printer driver when printing from a computer.Virtual MailboxVirtual mailbox is part of Job Storage, which stores print jobs on the hard disk withoutprinting. It enables you to retrieve jobs later from the operator panel or the KM-NETPrinter Disk Manager utility in the CD-ROM.Each mailbox may be used by an individual who desires to share the printer in this mode.By default, each mailbox is numbered from ‘Tray 001,’ ‘Tray 002,’ ... etc. To ‘post’ a job inone of these mailboxes, you assign a numbered or named mailbox on the printer driverwhen printing.To retrieve the stored job for printing, see Retrieving Jobs from Virtual Mailbox (VMB) onpage 3-28.NoteThe virtual mailbox can be used in PCL 6 emulation only.3.4.1 Using Quick CopyThis mode enables you to print the requested number of copies of a job, simultaneouslystoring the job on the hard disk. When additional copies are required, you can reprint therequired number of copies from the printer operator panel. To print a job as a quick copyjob, see KX Printer Drivers Operation Guide.The default number of print jobs that can be stored on the hard disk is 32. This value can beincreased to up to 50 from the e-MPS Configuration menu. For details, see Changing theMaximum Number of Quick Copy/Proof-and-Hold Jobs on page 3-30. When the number ofjobs reaches the limit, the oldest job will be overwritten by the new one.When the printer is turned off, all stored jobs will be deleted.
