3.10 Paper Handling3-806666 When the desired fuser mode is displayed, press the ENTER key. Proceed to the nextstep.Enabling or Disabling Duplex Printing for Custom Paper TypeThis parameter is valid for the FS-C8008DN printer which is equipped with the duplexer asa standard feature. When this parameter is disabled for a Custom type, the printer does notduplex print when the custom size is selected for the paper type in a print job.By default, duplex printing is enabled for custom paper types. To confirm and change this,proceed as follows:1111 Complete Step 3. above.2222 Press the Z key.3333 Press the U or V key repeatedly until >>Duplex Path appears.4444 To change duplex printing, press the ENTER key. A blinking question mark (?)appears.5555 Press the U or V key to change from Enable to Disable.6666 Press the ENTER key. The duplex printing capability is changed.7777 To exit the menu selection, press the MENU key.3.10.9 Resetting the Custom Paper TypeIf you want to reset all custom paper type settings (1 to 8) to the factory default, proceed asfollows:1111 Press the MENU key.2222 Press the U or V key repeatedly until Paper Handling > appears.3333 Press the Z key.>>Duplex PathEnable>>Duplex Path? EnablePaper Handling >
