3.6 Making Default Settings3-423.6 Making Default SettingsUsing the operator panel, you can set the default for the following items. Note defaultsettings made using the operator panel may be overridden by the printer driver settings andapplication software.3.6.1 Default EmulationYou can change the emulation mode and character code set for the current interface. Theprinter is capable of the following emulation modes:• HP PCL 6 (HP Color LaserJet 8550)• KC-GL (HPGL 7550A)• KPDL3 (PostScript 3)The printer can automatically switch between HP PCL 6 and KPDL3 depending on the printjob that is received from the computer. To do this, select KPDL (AUTO) in the followingprocedure.1111 Press the MENU key.2222 Press the U or V key repeatedly until Emulation > appears on the messagedisplay. One of the emulation modes appears, indicating the emulation currently inuse.PCL 6 (default)KC-GLKPDLKPDL (AUTO)3333 To change the default emulation, press the ENTER key. A blinking question mark(?) appears.4444 Press the U or V key repeatedly until the desired emulation mode is displayed.5555 Press the ENTER key.6666 Press the MENU key. The display returns to Ready.Emulation?PCL 6
