42 Xerox Phaser 5400 Laser PrinterAdvanced Features3. Press the Value keys (labeled 3 or 7) to select the desired tray sequence. The choicesshown depend on the options installed on your printer. You can include Tray 1 andthe Multi-sheet Bypass Feeder, and optional Trays 2 and 3.If you set the tray sequence to Off, the printer only prints from the tray requested inthe print driver, even if other trays contain the correct stock.4. Press the Enter key (labeled 4) to accept that tray sequence.5. Press the On Line key (labeled 0) to exit the menus.The default tray sequence depends upon the options installed:Tray sequence rulesWhen automatic tray switching is enabled, the printer searches the input trays for thecorrect size and type of paper for each job that is submitted. If you do not specify an input tray in the print driver when sending a job to the printer(no paper source is specified or the paper source is set to ìAutoî), the printer searchesthe trays in the tray sequence first (in the sequence order) before it searches othertrays not in the sequence. If you include ìMBFî in the Tray Sequence setting and you request an input tray inthe print driver when sending a job to the printer, that request is overridden. Theprinter attempts to feed paper from the MBF first. If the MBF is out of paper, then theother trays in the sequence are searched. If you specify an input tray when sending a job to the printer, and that tray isincluded in the tray sequence (and MBF is not in the tray sequence), the printerchecks that tray for the correct size and type of paper. If the tray contains the correct paper, it is used. If the tray does not contain the correct paper (it contains other paper or is empty),the other trays in the sequence are searched. If one of these trays contains the correct paper, it is used. If one of these trays are set to the correct paper size and type but all of thetrays in the sequence are empty, the printer prompts you to load paper intothe specified tray. If no trays in the sequence are set to the correct paper size and type, then theremaining trays in the printer are searched. If no trays can satisfy therequest, the printer prompts you to load paper into the specified tray.Option Tray sequence settingsBase configuration printer MBF-1, 1-MBF, OffOptional Tray 2 (either a 500-Sheet Feeder or the2,000-Sheet Feeder)MBF-2, MBF-1-2, MBF-2-1, 1-2, 2-1Optional Tray 3 (either a 500-Sheet Feeder or the2,000-Sheet Feeder)MBF-3, MBF-1-2-3, MBF-2-3, MBF-3-1,MBF-3-1-2, MBF-3-2, 1-2-3, 2-3, 3-1,3-1-2, 3-2