Advanced Features and Troubleshooting Manual 53Hard Disk Drive and Memory (DRAM and Flash ROM)Flash initializationYou must format the Flash Memory before its first use:1. On the printerís control panel, press the Menu keys (labeled 1 or 5) to scroll to theReset Menu.2. Press the Item keys (labeled 2 or 6) to scroll to Flash Format.3. Press the Value keys (labeled 3 or 7)to scroll to Yes.4. Press the Enter key (labeled 4).5. Press the On Line key (labeled 0) to exit the menus.Downloading fonts, forms, and macrosThe printer has a total of 80 PCL fonts, 39 PostScript fonts, and 1 bitmap font; refer to page50 for a complete list. Additional fonts can be downloaded to the printer with: the Font Download Utility, the PCL5e driverís Font Installer option, or PJL commands.Font Download UtilityThe Font Download Utility is a Windows-based graphical user interface tool. It downloadsfonts (single/double byte) to the hard disk or flash memory. In PostScript, the supportedfont types are Type 1, Type 2, and Forms. In PCL, the supported font types are HP-PCLfonts (Bitmap, Scalable) and Macros. Windows TrueType fonts can also be downloaded inPostScript (Type 1 ASCII).The Font Download Utility can print a list of the fonts currently loaded on the printerísoptional hard disk and flash memory. This utility is supported on Windows 95/98/Me,NT4.0, and Windows 2000. It can be installed from the printerís software CD-ROM.NotePrinter drivers have no knowledge of the fonts downloaded by the FontDownload Utility.PCL5e driverThe printer drivers provide you with the ability to download fonts, forms, and PCL5emacros to memory, to the optional hard drive, or to optional flash memory. To download fonts, you must first install the appropriate Windows 95/98/Me,Windows 2000, Macintosh, or Windows NT drivers. To download macros, you must install the Windows PCL 5e driver.