Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 4-57TroubleshootingWorkCentre 6015 MFP Fax/Scanner Diagnostic Test DescriptionsTestControl Panel(WorkCentre 6015N/NIColor MFP) DescriptionInformation Tests FAX and Scanner components.Scan Counter FB: 0x00000000ADF: 0x00000000Displays the scan counter value.■ FB: Platen scans■ ADF: ADF scansScanner MaintenanceWhite Balance White Balance Reports the result of white balancewhich is performed while the printerpowers up.Registration Param. This function adjusts the registrationparameters of the scanner.Parameter Range DescriptionRegi ADF Lead -2.0 mm to 2.0 mm,in 0.1 mm stepsAdjusts Registration of the ADF leadingedge.Regi ADF Side -1.0 mm to 1.0 mm,in 0.1 mm stepsAdjusts Registration of the ADF sideedge.Regi FB Lead -2.0 mm to 2.0 mm,in 0.1 mm stepAdjusts Registration of the flatbedleading edge.Regi FB Side -1.0 mm to 1.0 mm,in 0.1 mm stepsAdjusts Registration of the flatbed sideedge.Auto Registration Reports the result of auto registrationwhich is performed while the printerpowers up.IIT I/O Check ■ FB Home Sensor■ ADF Scan Sensor■ ADF Document Sensor■ ADF Cover SensorTests the scanner sensors.Scan Counter Clear This function clears the flat bed andADF counters.Parameter Value OptionsPulse Dialing Enable Pulse DialingNOTE You can not select Pulsedialing at the FaxSetting Menu, only Tonedial.Disable, EnablePulse dial make/breakratio0: 30% / 70%, 1: 32% / 68%,2: 33% / 67%, 3: 36% / 64%,4: 38% / 62%, 5: 39% / 61%,6: 40% / 60%, 7: 42%/ 58%Enable 20 PPS DPNOTE You can not select Pulse20PPS dialing at the FaxSetting Menu.Disable, EnableDTMF Tone DTMF high tonelevel (-dB)0: -3 dB, 1: -4 dB, 2: -5 dB, 3: -6 dB,4: -7 dB, 5: -8 dB, 6: -9 dB, 7: -10 dBDTMF high/low leveldifference (dB)0: 0 dB, 1: -1 dB, 2: -2 dB, 3: -3 dB,4:- 4 dB, 5: -5 dBDTMF DialingSpeed (ms)0: 70 ms, 1: 80 ms, 2: 85 ms,3: 90 ms, 4: 95 ms, 5: 100 ms,6: 105 ms, 7: 110 ms
