5-12 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFPImage QualityPrint-Quality Defect DefinitionsThe following table lists the print-quality defect corrective procedure, theirdefinition, and the page where each procedure is provided.Defect Description Go toLight or UndertonePrintThe image density is too light in all colors. 5-13Blank Print The entire image area is blank. 5-15Black Print The entire image area is black. 5-16Toner Smears Toner smears appear on the page. 5-17Random Spots Spots of toner are randomly scattered onthe page.5-18Streaks Streaks appear on the page. 5-19Pitched Color Dots Evenly spaced dots appear vertically in aline.5-20Vertical Blank Lines There are faded or completely non-printedlines along the page.5-21Ghosting There are faint, ghostly images appearingon the page.5-22Jagged Characters Characters have jagged or uneven edges. 5-23Horizontal Band,Voids, or StreaksHorizontal density non-uniformity appearsin halftone areas.5-24Auger Mark Diagonal density no uniformity appears inhalftone areas.5-25Damaged Media The paper is wrinkled, folded, or worn-out. 5-26Image Not Centered The image is not centered on the page. 5-28Color Registration Color registration is out of alignment. 5-31Skew The image is not parallel with both sides ofthe paper.5-32Unfused Image The toner is not completely fused. 5-34Hunting The printed image has wavy column line inthe direction of the paper travel.5-36IncorrectMagnificationIncorrect magnification when copying withthe ADF feeding.5-37
