Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 6-3Adjustment and CalibrationPhaser 6000/6010 Color Registration With the Printer Setting UtilityNoteThe Color Registration procedures for the Printer Setting Utility work with USBconnected Phaser 6000B and Phaser 6010N printers.Enabling/Disabling Automatic Color RegistrationUse the following procedure to enable or disable the automatic color registrationadjustment feature.1. On your computer, click Start > All Programs > Xerox Office Printing > Phaser6000B/6010N > Printer Setting Utility.2. Click the Printer Maintenance tab, then select Color RegistrationAdjustment from the list.3. Do one of the following:• To enable the feature, click to select On for Automatic RegistrationAdjustment.• To disable the feature, click to clear the check for Automatic RegistrationAdjustment.4. Click the Apply New Settings button to accept the change.Performing an Automatic Color Registration AdjustmentUse the following procedure to perform the automatic color registrationadjustment.NoteAn automatic color registration adjustment is performed every time a newToner Cartridge is installed.1. On your computer, click Start > All Programs > Xerox Office Printing > Phaser6000B/6010N > Printer Setting Utility.2. Click the Printer Maintenance tab, then select Color RegistrationAdjustment from the list.3. Click the Start button next to Auto Correct. The Automatic Color Registrationroutine runs.NoteThe Phaser 6000B only corrects the X axis. If skew is a problem, click the Startbutton next to Print Color Regi Chart and adjust the left and right values.
