8-100 Phaser 6300/6350/6360 Color Laser Printer Service ManualService Parts DisassemblyLVPS (PL9.1.4)The Low Voltage Power Supply (LVPS) assembly consists of the powersupply, attached power switch, the AC Inlet Harness, and the surroundingenclosure.1. Remove the Top Main Cover (page 8-11).2. Remove the Right Side Cover (page 8-14).3. Remove the Left Side Cover (page 8-15).4. Remove the Rear Cover (page 8-17).5. Unplug connectors (P/J161, 162, 163, 164, 165) from the LVPS.6. Remove the 1 screw (silver, 6 mm) that fixes the Power Switch LinkSupport Bracket and remove the bracket.7. Remove the 2 screws (1 metal, 6 mm, and 1 plastic, 10 mm) that securethe LVPS to the Toner Cartridge Holder Assembly.8. Remove the LVPS Fan Duct.9. Remove the 3 screws (metal, 6 mm) that secure the LVPS to the printerchassis.10. Remove the screw (self-tapping, plastic 10mm) located at the bottom ofthe LVPS, that secures it to Tray 2.11. Remove the harnesses from the Rear Cable Guide.12. Remove the screw (self-tapping, plastic 10mm) that secures the PowerSwitch Link Shaft support and remove the support.NoteIn the following step, do not remove the Switch Link Shaft from the printer.13. Release the Power Switch Link Shaft from the notch in the LVPS and liftup to remove the LVPS.Replacement NoteAlign the bosses at the base of the LVPS to those on the frame.
