10/004-97Phaser 790/DocuColor 2006 REP 9.8, REP 9.9Repairs and AdjustmentsInitial IssueREP 9.8 Erase LampParts List on PL 5.1RemovalWARNINGTo avoid personal injury or shock, do not perform repair activities with the power switchon or electrical power applied to the machine.1. Switch off the machine power and disconnect the machine Power Cord.2. Remove the Locating Rail (REP 9.5).3. Remove the Erase Lamp (Figure 1).Replacement1. Reinstall the Erase Lamp in the reverse order of removal.Figure 1 Removing the Erase LampREP 9.9 Dry Ink CartridgeParts List on PL 6.2RemovalWARNINGTo avoid personal injury or shock, do not perform repair activities with the power switchon or electrical power applied to the machine.1. Switch off the machine power and disconnect the machine Power Cord.2. Remove the appropriate Dry Ink Cartridge (Figure 1).CAUTIONAfter removing, be sure to lay the Dry Ink Cartridge in its horizontal position in a safe place.Replacement1. Place the arrow on the end of the Dry Ink Cartridge facing toward the top in order to insertthe cartridge.2. Reinstall the Dry Ink Cartridge in the reverse order of removal.Figure 1 Removing the Dry Ink Cartridge1Pull the harness throughthe hole2Unhook the lampfrom the rail bycompressing thetabs3Remove the Erase Lamp1Open the FrontCover Assembly2Lift and hold the leverduring the following step3Turn the knob toaccess the car-tridge to beremoved5Remove the Dry InkCartridge4Turn the knobto release thecartridge
