10/004-102 Phaser 790/DocuColor 2006REP 9.13Initial IssueRepairs and AdjustmentsREP 9.13 Cartridge SensorParts List on PL 6.1RemovalWARNINGTo avoid personal injury or shock, do not perform repair activities with the power switchon or electrical power applied to the machine.1. Switch off the machine power and disconnect the machine Power Cord.2. Remove the Top Cover Assembly (REP 14.4).3. Access the Cartridge Sensor (Figure 1).Figure 1 Accessing the Cartridge Sensor4. Remove the Cartridge Sensor (Figure 2).ReplacementCAUTIONSecurely route the harness in the hooks of the Sensor Plate and Rotary Latch so there is noslack in the harness.1. Reinstall the Cartridge Sensor in the reverse order of removal.Figure 2 Removing the Cartridge Sensor1Disconnect the con-nector2Disengage the wires from the hookon the Cartridge Sensor Plate1Remove the screwsecuring the Car-tridge Sensor Plate2Remove thescrew securingthe sensor3Remove the CartridgeSensor
