7. Gently push in the tray until it comes to a stop.If enabled by your System Administrator, the Paper Tray settings/Tray Propertieswindow may be displayed on the UI. You can view and set stock attributes and verifytrays are assigned with the correct stock.8. From the Paper Tray settings/Tray Properties window, choose one of the following:• No changes were made to the paper tray; select Confirm to close the window.• Changes were made to the paper tray; go to the next step.9. Select the Change Settings button.a) Make the desired selections for Paper Type/Paper Weight, Paper Size, andPaper Color.b) If necessary, make the desired changes to paper curl and alignment adjustment.c) Select Save until you are returned to the Paper Tray settings/Tray Propertieswindow.d) Select Confirm or OK to save the information and close the Paper Traysettings/Tray Properties window.Loading Tab Stock in Trays 1, 2, and 3Refer to the following tips before loading tab stock in the tray:• You can load either single straight collated or single reverse collated tab stock.• For network print jobs, refer to your print server customer documentation forinstructions on loading tab stock into a tray.• If a jam occurs while running tabbed sets, cancel the job and start again.1. Pull out the tray slowly until it stops.2. Fan the tab stock before loading into the tray.3. Load the tab stock LEF (portrait) and align the straight edge of the tab stock againstthe left edge of the tray (tabs to the right or trailing edge). For single straight collatedtabs, the first blank tab cutout in the stack will be toward the rear of the tray. Forsingle reverse collated tabs, the first blank tab cutout in the stack will be toward thefront of the tray.NoteTab stock is loaded so the straight edge of the stock is in the feed direction. Also, youcan only load the tab stock LEF.4. Adjust the paper guides by pressing in the guide release and carefully moving theEdge Guide until it lightly touches the edge of the stock in the tray.Do not load materials above the MAX line located on the rear Edge Guide.5. Gently push in the tray until it comes to a stop.Xerox® Versant® 180 Press4-6User GuidePaper and Media
