2. The Performance Package is not available with the Xerox EX-i 80 Print Server.Customers must order the external Xerox EX 80 Print Server.3. If customers configure the press with the Business Ready (BR) Finisher, the BusinessReady Finisher with Booklet Maker, or the Offset Catch Tray, then the PerformancePackage option is not available for the configuration.4. When the Performance Package is ordered, the Interface Cooling Module must beused. The package cannot be used with the Interface Module.5. Finishing options enabled by the Interface Cooling Module include these finishersand their options:• High Capacity Stacker (HCS)• Standard Finisher• Booklet Maker Finisher• Standard Finisher Plus• SquareFold Trimmer Module (which requires the Booklet Maker Finisher)• Plockmatic Pro 35 and Plockmatic Pro 50 (which requires the Standard FinisherPlus)Power On/OffThe Power SwitchesThere are three power switches involved with the press:• The Breaker switch located at the rear of the press. Initially check to make sure thisswitch is set to On when the press is shipped.• The Main Power switch located inside the Front Door. This switch is used mainly bythe Xerox Service Representative when servicing the press. In rare problem solvingcases, you may be directed to power off the press with this switch.• The Power On/Off button located on the top of the press near the Document Feeder.This button is the primary way for you to switch on or off the press. It is used by theoperator as workflow requires.Use the Power On/Off button to power ON or power OFF the press.2-7Xerox® Versant® 180 PressUser GuideGetting Started
