2. Open the front door of the press.3. Open the Dry Ink/Toner Waste Bottle Door.4. Grasp the handle of the Dry Ink/Toner Waste bottle and pull it halfway out of thepress.5. Support the underside of the bottle with your other hand and continue pulling it outfrom the press.CautionNever use a vacuum cleaner when cleaning up spilled dry ink/toner. Use a broom ora cloth moistened with a neutral detergent.6. Use both hands to place the old used Dry Ink/Toner Waste Bottle into the providedplastic bag.7. Remove a new, empty waste bottle from the packaging.8. Hold the center part on the top of a new bottle and insert it evenly and gently intothe press until it comes to a stop.9. Close the waste bottle door.10. Close the press front door.Replacing a Drum CartridgeOther than replacing a drum cartridge after 348,000 prints, you may need to replace adrum cartridge if it is damaged by light or you are experiencing spots and streaks onyour output.NoteAll four Drum cartridges are interchangeable.NoteAfter replacing the drum cartridge, the system automatically resets the usuage counterof this CRU component to zero (0). Check the Consumables screen for the reset and newstatus.CautionDo not leave the Drum Cartridge Drawer open for more than one minute. Exposing thedrum cartridges to direct sunlight or strong light from indoor fluorescent lighting formore than one minute may cause image quality defects.5-9Xerox® Versant® 180 PressUser GuideMaintenance
