Approximate Print Yield (FullColor 8.5x11/A4 Prints)Reorder QuantityCRUs (Supply Item)5,000 staples per cartridge1 Staple CartridgeBusiness Ready (BR) Finisher StapleCartridge5,000 staples per cartridge4 pack: 5,000 staple re-fills eachBusiness Ready (BR) Finisher withBooklet Maker Staple Cartridge5,000 each refill for a total of15,0003 refills per cartonStaple Refills for the Business ReadyFinisher and Business Ready Finisherwith Booklet MakerChecking the Status of ConsumablesWhen a consumable is reaching the time it needs to be replaced, a message is displayedon the press UI. This indicates when it is time to order and/or install a new consumableitem. With some CRUs, the screen indicates that the press may continue to run printjobs without immediately replacing the item. Otherwise, when it is time to replace it, amessage appears and the press stops running.1. Press the Home button on the UI.2. Press Machine Status and select the Supplies tab.The Supplies area shows a 1 to 100% indicator bar of the remaining amount of dryink/toner. Remaining dry ink/toner is updated in 10% increments.3. From the Supplies pull-down menu, select Other Consumables to view the status ofother consumables, such as the drum cartridges the Dry Ink/Toner Waste Bottle, andany applicable optional devices (such as the OHCF feed rolls).NoteThe status of the Fuser and Suction Filter are not shown, but a message displayswhen these items require replacing.Replacing a Dry Ink/Toner CartridgeNoteThe dry ink/toner cartridge can be replaced while a job is printing.5-7Xerox® Versant® 180 PressUser GuideMaintenance
