Paper JamsPaper Jams OverviewIf a paper jam occurs, a fault screen displays a message on the press UI indicating inwhich area the jam is situated. Follow the instructions provided for clearing the jam andresuming press operation.Information about Paper JamsReview the following list to address paper jams:• When paper jams inside the press, the press stops and a fault message displays.• Follow the instructions displayed on the User Interface to remove the jammed paper.• Gently remove the paper taking care not to tear it. If paper is torn, be sure to removeall torn pieces.• If a piece of jammed paper remains inside the press, the paper jam message willremain on the display.• Paper jams can be removed with the press still powered on. When the power is turnedoff, all information stored to the system's memory will be erased.• Do not touch components inside the press. This can cause print defects.• After clearing a paper jam, printing is automatically resumed from the state beforethe paper jam occurred.• If a paper jam occurred during printing, press the Start button. Printing is resumedfrom the state before the paper jam occurred.WarningWhen removing jammed paper, make sure that no pieces of jammed paper are left inthe press. A piece of paper remaining in the press can cause fire. If a piece of paper isstuck in a hidden area or paper is wrapped around the fuser unit or rollers, do not removeit forcefully. You can get injured or burned. Switch off the press immediately and contactthe Customer Support Center.Jam Recovery Offset FeatureThe Jam Recovery Offset Feature helps users verify and / or monitor job integrity whena jam occurs while printing offset output.The following two conditions are required in order for this feature to work:• When an Offset mode is available with the finishing device, such as the Offset CatchTray (OCT), High Capacity Stacker (HCS), Business Ready (BR) Finisher, Standard orBooklet Maker Finisher, or Standard Finisher Plus• When the printed offset output is not stapledIf your system meets these two requirements, then the Jam Recovery Offset Featuremay be set up and used.6-27Xerox® Versant® 180 PressUser GuideTroubleshooting
