Copying 5.115Auto Fit CopyingThis special copy feature can be applied only when you place adocument on the document glass. If a document is detected inthe ADF, Auto Fit copying does not work.1 Place the document to be copied on the document glass,and close the cover.2 Press More Features.3 Press More Features or the scroll button (W or X) until“Auto Fit” appears on the bottom line.4 Press Enter to make your selection.5 If necessary, customize the copy settings, includingnumber of copies, darkness, and original type, by using thecontrol panel buttons. See “Setting Copy Options” onpage 5.7.NOTE: You cannot adjust the copy size using the Reduce/Enlarge button while Auto Fit copying is enabled.6 Press Start to begin copying.2 Sides on 1 Page CopyingYou can copy a 2-sided document on one side of one page ofA4-, Letter-, Legal-, Folio-, Executive-, B5-, A5-, or A6-sizedpaper.When you copy using this feature, the machine prints one sideof the document on the upper half of the paper and the otherside on the lower half without reducing the size of the original.This feature is helpful for copying a small-sized document, suchas a name card.If the original document is larger than the printable area, someportions may not be printed.This special copy feature can be applied only when you place adocument on the document glass. If a document is detected inthe ADF, 2 Sides on 1 Page copying feature does not work.1 Place the document to be copied on the document glassand close the cover.2 Press More Features.A
