Getting Started 2.172If there is a number already set, the number appears.3 Enter your fax number using the number keypad.NOTE: If you make a mistake while entering numbers, press theW button to delete the last digit.4 Press Enter when the number on the display is correct. Thedisplay asks you to enter an ID.5 Enter your name or the company name using the numberkeypad.You can enter alphanumeric characters using the numberkeypad, and include special symbols by pressing the 0button.For details on how to use the number keypad to enteralphanumeric characters, see “Entering Characters Usingthe Number Keypad” on page 2.17.If you want to enter the same letter or number insuccession (e.g. SS, AA, 777), enter one digit, move thecursor by pressing the X button, and enter the next digit.If you want to insert a space in the name, you can also usethe X button to move the cursor to skip the position.6 Press Enter when the name on the display is correct.7 To return to Standby mode, press Stop/Clear.Entering Characters Using the NumberKeypadAs you perform various tasks, you need to enter names andnumbers. For example, when you set up your machine, youenter your name (or your company’s name) and telephonenumber. When you store one-, two-, or three-digit speed dial orgroup dial numbers, you may also enter the correspondingnames.To enter alphanumeric characters:
