Copying5.14Changing the Default SettingsThe copy options, including darkness, original type, copy size,and number of copies, can be set to the most frequently usedmodes. When you copy a document, the default settings areused unless they are changed by using the correspondingbuttons on the control panel.To create your own default settings:1 Press Menu on the control panel until “Copy Setup”appears on the top line of the display.The first menu item, “Default-Change,” appears on thebottom line.2 Press Enter to access the menu item. The first setupoption, “Lighten/Darken,” appears on the bottom line.3 Press the scroll button (W or X) to scroll through the setupoptions.4 When the option you want to set appears, press Enter toaccess the option.5 Change the setting using the scroll button (W or X).You can also enter the value using the number keypad.6 Press Enter to save the selection.7 Repeat steps 3 through 6, as needed.8 To return to Standby mode, press Stop/Clear.NOTE: While you are setting copy options, pressing Stop/Clearcancels the changed settings and restores their default status.
