Using Your Machine In Linux A.13AThe following four tabs display at the top of the window.• General - allows you to change the paper size, the papertype, and the orientation of the documents, enables theduplex feature, adds start and end banners, and changesthe number of pages per sheet.• Text - allows you to specify the page margins and set thetext options, such as spacing or columns.• Graphics - allows you to set image options that are usedwhen printing images/files, such as color options, imagesize, or image position.• Device: allows you to set the print resolution, papersource, and destination.5 Click OK to apply the changes and close the Xerox WCPE120 Series Properties window.6 Click OK in the Xerox LPR window to start printing.7 The Printing window appears, allowing you to monitor thestatus of your print job.To abort the current job, click Cancel.Printing FilesYou can print many different types of files on the Xerox MFPdevice using the standard CUPS way - directly from thecommand line interface. The CUPS lpr utility allows you do that.But the drivers package replaces the standard lpr tool by a muchmore user-friendly Xerox LPR program.To print any document file:1 Type lpr from the Linux shell command lineand press Enter. The Xerox LPR window appears.When you type only lpr and press Enter, the Select file(s)to print window appears first. Just select any files you wantto print and click Open.2 In the Xerox LPR window, select your printer from the list,and change the printer and print job properties.For details about the properties window, see page A.12.3 Click OK to start printing.
