Using USB Flash Drive10.42 Make sure that the USB flash drive is inserted into the USBport in the front of the machine. If necessary, insert theflash drive. See page 10.2.3 Press Scan-to... on the control panel.The first available menu item, “USB Memory,” appears onthe bottom line of the display.4 Press Enter. The display shows the available memory spacefor about 2 seconds and the first available menu item,“Auto Scan,” appears on the bottom line of the display.5 Press Enter to start scanning. The scanned image is savedon the USB flash drive.6 When a document is loaded on the document glass, thedisplay shows “Another Page?” on the top line after thepage has been scanned into memory. If you have anotherpage, remove the scanned page and place the next page onthe glass. Select “Yes” Repeat as necessary.After all of the pages have been scanned, select “No” whenthe display asks “Another Page?”7 To return to Standby mode, press Stop/Clear.Scanning With Your Own Settings1 Load the document face up into the ADF.ORPlace a single document face down on the document glass.For details about loading a document, see page 7.6.2 Make sure that the USB flash drive is inserted into the USBport in the front of the machine. If necessary, insert theflash drive. See page 10.2.3 Press Scan-to... on the control panel.The first available menu item, “USB Memory,” appears onthe bottom line of the display.
