Paper Handling3.4- To avoid smudging caused by fingerprints, handle themcarefully.- To avoid fading, do not expose printed transparencies toprolonged sunlight.• For labels:- Verify that their adhesive material can tolerate a fusingtemperature of 200 o C (392 o F) for 0.1 second.- Make sure that there is no exposed adhesive materialbetween them. Exposed areas can cause labels to peel offduring printing, which can cause paper jams. Exposedadhesive can also cause damage to machine components.- Do not load a sheet of them through the machine more thanonce. The adhesive backing is designed for one passthrough the machine.- Do not use labels that are separating from the backingsheet or are wrinkled, bubbled or otherwise damaged.• Do not use Carbonless paper and Tracing paper. Use ofthese types of paper could result in chemical smells and coulddamage your machine.Loading PaperIn the Standard TrayLoad the print material you use for the majority of your printjobs in the standard tray.The standard tray can hold a maximum of 250 sheets of 20 lbplain paper.You can purchase an optional paper tray (Tray 2) and attach itbelow the standard tray to load an additional 250 sheets ofpaper. See page D.6 for more information about installing theoptional Tray 2.
