Using USB Flash Drive 10.71012 If you selected “BMP” in step 10, you are asked to select acolor format, Color, Gray, or Mono, by pressing the scrollbutton (W or X).If you selected “TIFF” or “PDF” in step 10, you can save amultiple-page document as a single file. After you select“TIFF” or “PDF”, the machine displays “Multi-Page Scan”and offers you the choice of “On” or “Off.” If you select “On”you can save multiple pages as a single file, but this featureis only activated when you load your document into theADF. The ADF can handle documents of up to 50 pages at atime.13 Press Enter to make your selection.14 To return to Standby mode, press Stop/Clear.Deleting an Image FileTo delete an image file that you scanned and saved on the USBflash drive:1 Make sure that the USB flash drive is inserted into the USBport in front of the machine. If necessary, insert the USBflash drive. See page 10.2.2 Press Scan-to... on the control panel.The first available menu item, “USB Memory,” appears onthe bottom line of the display.3 Press Enter. The display shows the available memory spacefor about 2 seconds and the first available menu item,“Auto Scan,” appears on the bottom line of the display.4 Press the scroll button (W or X) until you see “File Manage”on the bottom line and press Enter.The first available menu item, “Delete,” appears on thebottom line of the display.5 Press Enter.6 Press the scroll button (W or X) until you find the folder orfile you want and press Enter.If you see “D” in the front of a folder name, there are oneor more folders in the selected folder.
