6. Select Save.7. Select Close on the General Administration screen to return to the Administrationtab screen.Changing the Administrator PasswordThe following describes the procedure for changing the System Administrator password.This is the same system password that is required when accessing the machine from theWeb Printer Management Tool.If required, create a new system password immediately after machine installation andperiodically thereafter. Be sure to record the password in a secure location.NOTEThe password can contain one to five numbers, from 0 to 99999.1. Select Machine Info from the Services menu.The Machine Information screen displays.2. Select the Administration tab.3. Select General Administration.The General Administration screen displays.4. Select Change The Administrator Password....The Enter SA Password menu displays.5. Using the numeric keypad to enter the digit(s), enter a system password.6. Select Enter.7. Select Close to exit the General Administration screen.Job Accounting OverviewJob Accounting tracks copy, scan, and print media usage. Usage is expressed as the areaand length of the media scanned or used.The job accounting feature is an option, requiring a feature key to activate. If you obtainthis feature, the System Administrator can enable it at any time by sending a specialfeature key file to the Copier/Printer. Contact your Xerox Sales Representative for orderinginformation.Job Accounting can be enabled from both the User Interface and the Web PrinterManagement Tool.The default setting is Disabled.The Account Management Tool (AMT), or another third party accounting tool, is usedto assign a User ID, Account ID, and Printer ID. It then collects and tallies the storeddata from the networked devices. When the Account Management Tool is set up, aSystem Administrator generates and provides the required IDs to the users.5-7Xerox®Wide Format 6622 Solution™User GuideSystem Administration
