8. Confirm the copy quantity on the Quantity screen, or enter a new quantity usingeither the numeric keypad or the scroll buttons.9. Select Print on the Quantity screen.The machine starts printing collated sets of copies.Printer InterruptYou can interrupt a print job to make a high priority copy. The interrupted print jobresumes after the copy job finishes.1. Select Printer Interrupt on the Copy > Basic Copy screen while a print job isprocessing.The Printer Interrupt selection remains illuminated throughout the interrupt job.Typically, no more than two prints exit the machine from the interrupted job.2. When the suspended job stops, the Copy screen reappears.3. Select the required copy settings.4. Enter the copy quantity desired.5. Scan the original(s).6. When the copy job is finished, select the Printer Interrupt button again to resumethe print job.NOTEIf you forget to select Printer Interrupt to resume the print job, it will be canceledautomatically as a default.NOTEThe Print Interrupt Timeout period may be changed from the one minute defaultup to 99 minutes. Print Interrupt Timeout can be reset by the Administrator.Refer to the System Administration chapter for details.Scan DisplayThis feature displays a scanned preview as your original is fed into the Scanner. Thepreview reflects data taken directly from the Scanner and may not represent the qualityof the final output. Depending on the scan mode, additional image conversion takesplace beyond the initial scan.Check mark the Scan Display box located on the Basic Copy screen to enable.If the Scan Display box is not visible on the Basic Copy screen, it has been disabled bythe System Administrator in Machine Information > Administration> General Administration > Set Scan Display.Setting Up the Image Quality SelectionsYou can configure the Image Quality features displayed to ensure that you obtain thebest image results from each original.2-15Xerox®Wide Format 6622 Solution™User GuidePrinting and Copying Documents
