FunctionButton NameNum.Used to Stop the scanning of an original.Stop7Used to Start the scanning of a copy or scan job.Start8LanguageThe Language feature enables you to select the default language, units of measurement,and date format that displays on the Touch Screen, web interface, controller-generatedtest prints, banner sheets, configuration pages, and so forth.1. Press the Language button on the Control Panel.2. Select the radio button of the desired language.3. Select the Inches or the Millimeters radio button to set up the default units ofmeasurement.4. Select the appropriate radio button from the Date Format choices.• Imperial: The date displays in the format MM/DD/YYYY.• International: The date displays in the format DD/MM/YYYY.5. Select Save to close the Language screen and return to the Services menu.Using the Power Saver FeatureThe Power Saver feature automatically reduces the power consumption when no printdata is received within a preset period. The Power Saver feature has two modes, LowPower Mode and Sleep Mode.The machine enters the Low Power Mode after a preset period elapses. The machinetransitions to the Sleep Mode from the Low Power Mode if the machine remains idle foran additional period.NOTERefer to the Timers section to learn how to customize the Power Saver mode settings.Low Power ModeIn this mode, the power to the control panel and the fuser is reduced. As the machineenters the Low Power Mode, the Touch Screen shuts down and the Power Saver buttonon the control panel illuminates.Sleep ModeIn this mode, the power is reduced more than in the Low Power Mode. During thetransition from the Low Power mode to the Sleep mode, the Touch Screen remains darkand the Power Saver button remains illuminated.Entering the Power Saver ModeThe Power Saver Mode may be entered either automatically or manually.1-15Xerox®Wide Format 6622 Solution™User GuideProduct Overview
