This is a security feature that can be set to prevent exposure of confidential informationto any user.The procedure to Set Thumbnail Creation is listed below:1. Select Machine Info from the Services menu screen.The Machine Information screen displays.2. Select the Administration tab.3. Select General Administration.4. Select Set Thumbnail Creation...The Thumbnail Creation screen displays.5. Select the Enabled or Disabled button.Administrator Managed QueueThis feature is most often used in a centralized print environment where a SystemAdministrator sets a secured password for access to manage jobs.When the Administrator Managed Queue is enabled, all incoming print jobs are placedon hold.The ability to release, hold and cancel jobs with the administrator manager queueenabled is restricted to the System Administrator if there is a secure password set.Without a secure password set, any user can perform these operations.Placing all jobs on hold:1. Select Machine Info from the Services screen.2. Select General Administration.3. Select Enable/Disable Administration-Managed Queue.4. Select Enable.5. Select Save.6. Submit the print job.7. Locate the job in the Hold queue from Job Information on the UI or Print Queue onWeb Printer Management Tool.Control Panel SettingsThe Control Panel Settings enable you to control the sound level of the machine, set uptimers for machine time-out features and calibrate the Touch Screen. If you are notalready logged in as a System Administrator, you are prompted to enter a SystemAdministrator password to access the Control Panel settings.The Control Panel options allows you to set the following features:• Sound Settings• Configure Timers• Set Scan Start mode• Calibrate Touch ScreenXerox®Wide Format 6622 Solution™5-14User GuideSystem Administration
