2. Press Enter and then the --> Key or the <-- Key, to change the status.The status (on or off) is displayed. If the status is off, Low Power Saver is disabled.3. Press Enter again for access to the time interval.The current setting (in minutes) is displayed.The selectable ranges are 10, 15, 20, 30, 40, 50, 60, 90, 120, 180 and 240 minutes.(Factory default is On and set to 15 minutes)4. To change the time, press the <-- Key to increase and the --> Key to decrease, thenpress Enter to save the data.5. After you enter the desired time interval, press the Online Key to exit the User Mode.NOTEAfter 15 minutes of inactivity, the printer will reset the developer motor andenter an idle state. A loud “thump” noise will be heard as the motor resets. Thisis normal.User Mode 4 - U4 (High Power SaverMode)NOTEThe User Interface has a default setting for this feature and will over ride(disable) manual settings in this user mode.When the High Power Saver Mode is enabled, the printer switches off power to the PrinterFuser Assembly after a predetermined time of inactivity. If the printer does not receivea print job or a copy job for the time selected in this mode, the printer will enter the HighPower Saver Mode to save power consumption.The High Power Saver Mode saves more power than the Low Power Saver Mode and therecovery time is longer.If a print or copy job is detected by the printer, the printer will then enter the Warm upMode prior to the start of the job to heat the Fuser Assembly to 178oC/352oF.The green LED Light inside of the Menu Button flashes when the printer is in a powersaver mode.1. To enter User Mode 4 press the Menu Key 4 times when the printer is in the Standby(idle) Mode.The Menu Key lights green and the Status Display indicates U4. Flashing on the leftside of the display. The time interval is shown on the right side of the display.NOTEFactory default is On and set to 90 minutes.2. Press Enter and then the --> Key or the <-- Key.The status (On or Off) is displayed. If the status is off, High Power Saver is disabled.7-5Xerox®Wide Format 6622 Solution™User GuideUser Modes
