Original TypeSelect the Original Type from the available options on the Basic Copy tab.• Photo (Halftone)• Photo (ConTone)• Text/Photo• Text/Line• Text/Line (Clear)Refer to Document Input in the Product Overview chapter, for details on copying specialoriginal types.Media SourceThe Media Source selections enable you to select where the media for the copy job isfed. The definition describing each selection under Media Source is that which is currentlyloaded. The Media Source indicates the type of media that is currently loaded.The factory default setting is Auto Select.NOTEIf you prefer a different media series (ARCH, ANSI, etc.), go to Machine Info> Media Status and Setup and change the series.1. Select Copy on the Services menu.The Copy screen displays.2. Choose from the following Media Source selections:• Auto Select:The machine automatically selects the correct media based on theoriginal size detected and the specified reduction and enlargement.• Cut Sheet Media:Cut sheet media is the media type which is loaded in the ManualFeed-in Shelf (Bypass). The Media Feed-in Shelf is the last choice shown in thecolumn.• Roll Media:Select from the roll media size(s) loaded in the Media Drawers.Output FormatThe Output Format feature permits you to specify the media cut mode.The factory default setting is Synchronized.1. Select Copy on the Services menu.The Copy screen displays.2. Select the button that appears under Output Format for the media cut mode desired:2-11Xerox®Wide Format 6622 Solution™User GuidePrinting and Copying Documents
