User Mode A - UA (Custom Setting Film)This mode switches between the standard setting for film and the custom setting forfilm. This feature enables the Service Representative to custom set the printer for abrand of film that has different handling characteristics.NOTEThe custom setting parameters (Fuser Temperature, Fuser Motor Speed, LeadEdge Registration etc.) must first be set by the Service Representative in orderto be effective.1. With the printer in the Standby (idle) condition, press the Menu Key 10 times to enterMode A.The Menu Key lights and the display indicates UA2. Press Enter3. Press the --> key to change the value to 1 (On)• Standard Setting - 0• Custom Setting - 14. Press Enter key to store the value.5. Press the Online Key to exit the User Mode.User Mode b - Ub (Image Enhancement)There are 4 Image Enhancement Modes that can be set to improve reproduction of grayscale. Increasing the setting of this feature increases the density of single pixels. Therecan be, however, a noticeable overall degradation in gray scale images as the setting isincreased. Experimentation will be required to achieve the correct balance.Xerox®Wide Format 6622 Solution™7-10User GuideUser Modes
