Scanning To a Standard MailboxThis section describes scanning to a standard mailbox, and assumes that a mailbox hasalready been setup. Listed below are the steps involved in the scanning process:Step 1: Selecting a Standard MailboxStep 2: Selecting Scan to Mailbox FeaturesStep 3: Select Image Quality FeaturesStep 4: Select Advanced Settings FeaturesStep 5: Scanning the DocumentStep 6: Stopping a Scan JobStep 7: Retrieving Files Stored in a MailboxStep 1: Selecting a Mailbox and Using TemplatesScanning a copy begins by displaying the Scan to Mailbox screen on the User Interface.Once that is done, set up the scan job by selecting the necessary features from the Scanto Mailbox, Image Quality and Advanced Settings tabs.NOTEYou must first specify the destination of the scanned image data before scanningcan begin.1. Select Scan to Mailbox.The screen displays with the following:1. Destination (mailbox or removable device name)2. Template (customized format)3-9Xerox®Wide Format 6622 Solution™User GuideScanning Documents
