Scanning104 WorkCentre 3045 Multifunction PrinterUser GuideLoading Documents for ScanningPosition the original document as shown.Document GlassLift the automatic document feeder or thedocument glass cover, then place theoriginal face down in the upper left cornerof the document glass.Automatic Document FeederInsert originals face up with the top of the pageentering the feeder first. Adjust the paper guides sothey fit against the originals.Automatic Document Feeder GuidelinesNote: Available on WorkCentre 3045NI Multifunction Printer only.The automatic document feeder accommodates the following originals:• Width: 148–216 mm (4.1–8.5 in.)• Length: 210–355.6 mm (8.3–14 in.)• Weight: 60–105 g/m² (16–28 lb. Bond)Follow these guidelines when loading originals into the automatic document feeder:• Load originals face up so that the top of the document enters the feeder first.• Place only loose sheets of paper in the automatic document feeder.• Adjust the paper guides so that they fit against the originals.• Insert paper in the automatic document feeder only when ink on the paper is dry.• Do not load originals above the MAX fill line.Document Glass GuidelinesThe document glass accommodates original sizes up to 216 x 297 mm (8.5 x 11.7 in.). Use the documentglass rather than the automatic document feeder to copy or scan the following types of originals:• Paper with paper clips or staples attached
