TroubleshootingWorkCentre 3045 Multifunction Printer 173User GuidePrint-Quality ProblemsThis section includes:• Controlling Print Quality ..............................................................................................................................................173• Controlling Print Quality ..............................................................................................................................................173• Solving Print-Quality Problems..................................................................................................................................174Your printer is designed to produce consistently high-quality prints. If you observe print-quality problems,use the information in this section to troubleshoot the problem. For more information, go towww.xerox.com/office/WC3045support .CAUTION: The Xerox ® Warranty, Service Agreement, or Xerox ® Total Satisfaction Guarantee doesnot cover damage caused by using unsupported paper or specialty media. The Xerox ® TotalSatisfaction Guarantee is available in the United States and Canada. Coverage could vary outsidethese areas. Please contact your local representative for details.Note: To ensure print quality, the toner cartridge has been designed to cease functioning at apredetermined point.Controlling Print QualityVarious factors can affect the quality of the output of your printer. For consistent and optimum printquality, use paper designed for your printer and set the paper type correctly. Adjust the bias transferroller and fuser for the paper type and weight you are using. Follow the guidelines in this section tomaintain optimum print quality from your printer.Temperature and humidity affect the quality of the printed output. The guaranteed range for optimalprint quality is: 15–28ºC (59–82ºF) and 20–70% relative humidity.Controlling Print QualityVarious factors can affect the quality of the output of your printer. For consistent and optimum printquality, use paper designed for your printer and set the paper type correctly. Adjust the bias transferroller and fuser for the paper type and weight you are using. Follow the guidelines in this section tomaintain optimum print quality from your printer.Temperature and humidity affect the quality of the printed output. The guaranteed range for optimalprint quality is: 10–32ºC (50–90ºF) and 20–70% relative humidity.Paper and MediaYour printer is designed to use various paper and other media types. Follow the guidelines in this sectionfor the best print quality and to avoid jams:
