FeaturesWorkCentre 3045 Multifunction Printer 37User GuideEnergy Saver ModeThis section includes:• Setting the Power Saver Timer ................................................................................................................................... 37• Exiting Energy Saver Mode........................................................................................................................................... 37You can set the time the printer spends idle in ready mode before it automatically transitions to a lowerpower level. You can also turn off the automatic transition.Setting the Power Saver Timer1. On the printer control panel, press the System button.2. To select Admin Menu, press the arrow buttons, then press OK.3. To select System Setup, press the arrow buttons, then press OK.4. At Power Saver Timer, press OK.5. Press the arrow buttons to select one of the following:• Power Saver Mode 1: Reduces power consumption to 15 W or less when the printer is left idle.Set the timer from 5–60 minutes. The default setting is 1.• Power Saver Mode 2: Disables control panel and all sensors after the printer enters Mode 1.Reduces power consumption to 7 W or less. Set the timer from 1–60 minutes. The defaultsetting is 10.6. Press OK.7. To select the desired time, press the arrow buttons, then press OK to save the changes.8. To return to Ready, press the Return button four times.Exiting Energy Saver ModeThe printer automatically cancels Energy Saver mode when it receives data from a connected computer.To exit Energy Saver mode manually, press the Power Saver button on the control panel.
