Installation and Setup56 WorkCentre 3045 Multifunction PrinterUser Guide1. On the printer control panel, press the System button.2. To select Admin Menu, press the arrow buttons, then press OK.3. To select Network, press the arrow buttons, then press OK.4. To select TCP/IP, press the arrow buttons, then press OK.5. To select IPv4, press the arrow buttons, then press OK.6. To select IP Address, press the arrow buttons, then press OK.The IP address of the printer appears on the IP Address screen.Changing the IP Address Using CentreWare Internet ServicesTo change the IP address of the printer using CentreWare Internet Services:1. At your computer, open a Web browser, type the IP address of the printer in the address field, thenpress Enter or Return.Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer onpage 55.2. Click the Properties link.If the Protocols link is not expanded under Properties, scroll to the Protocols link and expand it.3. Click TCP/IP.4. In the IPv4 section of the page, make the desired changes. For example, to change the way theprinter acquires the IP address, in the Get IP Address field, select a method from the drop-down list.5. After changing the address information, scroll to the bottom of the page and click Save Changes.Setting Up the Fax HeaderIt is unlawful to send a message from a fax machine without the proper Fax Send Header information.The following information must appear on the first transmitted page, or in the top or bottom margin ofeach transmitted page:• Identity of the business or individual sending the fax• Telephone number of the sending machine• Date and time of the transmissionTo set the required Fax Send Header information at the control panel:
