Copying94 WorkCentre 3045 Multifunction PrinterUser GuideMaking Copies1. To clear previous control panel copy settings, press the Clear All button.2. Load your original documents:• Use the document glass for single pages or paper that cannot be fed using the automaticdocument feeder. Lift the automatic document feeder or the document glass cover, then placethe original face down in the upper left corner of the document glass.• Use the automatic document feeder for multiple or single pages. Remove any staples andpaper clips from the pages, then place them face up in the document feeder. Insert originalsface up with the top of the page entering the feeder first. Adjust the paper guides so they fitagainst the originals.3. On the control panel, press the Copy button.4. Using the control panel keypad, enter the desired number of copies. The number of copies appearson the upper right corner of the display. To reset the number of copies to 1, press the Clear Allbutton.5. To select the copying option you want to change, press the arrow buttons. For details, see AdjustingCopying Options on page 96.6. Press the Start button. One set of copies prints.If you place originals in the automatic document feeder, copying continues until the automaticdocument feeder is empty.
