Installation and Setup44 WorkCentre 3045 Multifunction PrinterUser GuideInstallation and Setup OverviewBefore printing, your computer and the printer must be plugged in, turned on, and connected. Configurethe initial settings of the printer, then install the driver software and utilities on your computer.You can connect to your printer directly from your computer using USB, or connect over a network usingan Ethernet cable or wireless connection. Hardware and cabling requirements vary for the differentconnection methods. Routers, network hubs, network switches, modems, Ethernet cables, and USB cablesare not included with your printer and must be purchased separately. Xerox recommends an Ethernetconnection because it is typically faster than a USB connection, and it provides access to CentreWareInternet Services.Note: If the Software and Documentation disc is not available, you can download the latest driversfrom www.xerox.com/office/WC3045drivers .See also:Selecting a Location for the Printer on page 45Choosing a Connection Method on page 46Connecting the Printer on page 46Configuring Network Settings on page 52Installing the Software on page 60
