Network ConnectivityXerox ® WorkCentre® 4265 Multifunction Printer 45System Administrator GuideConnecting to a Wireless Network ManuallyWhen connecting to a wireless network that does not include a WPS-compliant router, set up andconfigure the printer manually. Before starting, you must get the setup and configuration information,such as name and passphrase, from the router. After you collect the network information, you can set upthe printer from the control panel or from CentreWare Internet Services. For the easiest manualconnection, use CentreWare Internet Services.Before you begin:• The wireless router must be connected and properly configured for the network before you installthe printer. For details, see your router documentation.• Use the instructions provided with your wireless router or access point to record the followinginformation:− Name (SSID)− Security Options (Encryption Type)− PassphraseNote: The network name and passphrase are case sensitive.Configuring the Printer for Wireless LAN WPA-Enterprise1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.2. Click Wireless Setup.3. Click Edit Settings.4. For Network Name SSID, select an option.5. To refresh the list of available networks, click Refresh.6. For Security Type, select WPA/WPA2-Enterprise.7. For 802.1x Authentication, select an authentication protocol.− If you select EAP-TTLS, select an Inner Authentication Protocol, then type an Identity Name,User Name, and User Password.− If you select PEAP, type a User Name and Password.8. For Root Certificate Setup, upload a Root Certificate.9. For Client Certificate Setup, upload a Client Certificate, then enter the Private Key Password.10. For Address Acquisition, select a protocol option.11. Click Apply.
