Security66 Xerox ® WorkCentre® 4265 Multifunction PrinterSystem Administrator Guide802.1X802.1X is an Institute for Electrical and Electronics Engineers (IEEE) standard that defines a method forport-based network access control or authentication. In an 802.1X secured network, the printer must beauthenticated by a central authority, typically a RADIUS server, before it can access the physicalnetwork.You can enable and configure the printer to be used in an 802.1X secured network from the printercontrol panel or in CentreWare Internet Services.Before you begin:• Ensure that your 802.1X authentication server and authentication switch are available on thenetwork.• Determine the supported authentication method.• Create a user name and password on your authentication server.Note: This procedure causes the printer to restart and be unavailable over the network for severalminutes.Configuring 802.1X in CentreWare Internet Services1. In CentreWare Internet Services, click Properties > Security.2. Click 802.1X.3. For 802.1X, select Enabled.4. For Authentication Method, select an option.5. For Credentials, type the user name and password.6. To upload a root certificate, do the following steps.a. For Upload Root Certificate, to locate and select the file, click Browse or Choose File.b. Click Upload.7. To upload a client certificate, do the following steps.a. To locate and select the Client Certificate, for Upload Client Certificate, click Browse or ChooseFile.b. To assign a private password, for Private Key Password, type a password.c. Click Upload.8. Click Apply.
