SecurityXerox ® WorkCentre® 4265 Multifunction Printer 53System Administrator GuideConfiguring Network Authentication SettingsWhen you configure network authentication, users prove their identity by typing a user name andpassword at the control panel or in CentreWare Internet Services. The printer compares the usercredentials to the information stored on an authentication server.To configure access rights using network authentication:1. In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.2. Click Login Methods.3. To store user login information in an external network database, such as an LDAP directory, selectNetwork Authentication.4. To retrieve profile information from LDAP, select Retrieve Profile Information for AuthenticatedUser from LDAP.5. To configure the Authentication Server, click the Pencil icon.6. To configure the LDAP Server, click the Pencil icon.Configuring Authentication Server Settings for Kerberos1. In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.2. Click Login Methods.3. For Authentication Server, click the Pencil icon.4. For Authentication Protocol, select the authentication protocol for your network.5. Select your AutoLookup preferences.6. For Default Server information, type the domain or realm for your authentication server.7. Select the desired address type.8. Type the appropriately formatted address and port numbers for both the primary and backupaddresses.9. To use an LDAP server for network authorization or personalization, select the LDAP server from thelist.10. For Alternate Server, enter your alternate server authentication settings.11. Click Save.Configuring Authentication Server Settings for SMB1. For Authentication Server, click the Pencil icon.2. For Authentication Protocol, select SMB (Windows ADS).3. For Domain Name, type the domain name of your authentication server.4. Select the address type.5. Type the appropriately formatted address and port number.6. For Alternate Server, enter your alternate server authentication settings.7. Click Save.
