3-18 Xerox WorkCentre C226 System Administration GuidePostScript Kit19. When the finish installation window appears, click the [Close] button.When the message "Now connect the interface cable to the PC. This will finalizethe driver's installation and settings." appears, click the [OK] button.NOTE: A message prompting you to restart your computer may appear after installation isfinished. If this message appears, click [Yes] to restart your computer.20. Turn off both the machine power and the computer power and then connect theparallel cable.After connecting the cable, turn the machine power on first and then turn on yourcomputer.This completes the installation.Uninstalling Printer Drivers and Printer UtilitiesWhen uninstalling a printer driver that has been installed from the Add Printer wizard,right-click the printer to be deleted from "Printers" of "Control Panel" and select[Delete]. When uninstalling a printer driver that has been installed using the installer,the Xerox Printer Administration Utility or the Xerox Print Status Monitor, use "Add/Remove Programs" of "Control Panel". Use the Windows standard operation for eachcase.Installing Printer Drivers Using the "Add Printer Wizard"Before installationBefore installing the printer drivers, check the following items.Ensure that your computer system meets the following requirements.Computer type:IBM PC/AT or compatible computerHardware requirements of the operating system must be satisfied.Operating system:Microsoft Windows 95Microsoft Windows 98Microsoft Windows MeMicrosoft Windows 2000 Server/ProfessionalMicrosoft Windows NT 4.0 (Service Pack 3 or later)Microsoft Windows XP Professional/Home EditionMicrosoft Windows Server 2003
