Storing, Editing, and Deleting Auto Dial Keys and ProgramsXerox WorkCentre C226 System Administration Guide 6-19NOTES: If you cannot edit or delete a one-touch keyIf you attempt to edit or delete a one-touch key in the following situations, a warningmessage will appear and editing/deletion will not be possible.• The one-touch key you wish to edit or delete is currently being used fortransmission or is used in a currently stored transmission job (including a timertransmission).• The one-touch key is included in a group key. (See “Editing and Deleting GroupKeys” on page 6-21.)• The one-touch key is included in a group of end receiving machines for an F-coderelay broadcast operation. (See “Editing and Deleting a Memory Box” on page 6-37.)• The one-touch key is included in a program. (See “Editing and Deleting Programs”on page 6-26.)• If the key is being used for a transmission currently in progress or a storedtransmission, cancel the transmission or wait until it is completed and then changeor delete the key. If the key is included in a group, delete the key from the groupand then change or delete it.Storing a Group KeyUp to 100 destinations can be stored in a group key.To program a group key, follow steps 1 through 3 beginning on page 6-9, touch the[GROUP] key in step 4, and then follow these steps.NOTE: Only one-touch key destinations can be stored in a group key. If you wish to store adestination that is not programmed in a one-touch key, first program the destination ina one-touch key and then store it in the group key.1. Follow the same steps 1 through 7 of “Storing One-Touch Keys” (page 6-11) toenter a [GROUP NAME], [INITIAL], and [INDEX].* In step 1 on page 6-11, touch the [GROUP NAME] key instead of the [NAME]key.2. Touch the [ADDRESS] key.ame Group-Digital DocumentX User 2 Addressme
