6-46 Xerox WorkCentre C226 System Administration GuideFax UnitKey Operator Program ListProgram Name Page Program Name PageFAX SETTINGSFax default settings Fax send settings“Default display settings” 6-50 “Auto reduction sending setting” 6-55“The number of direct address keysdisplayed setting”6-50 “Rotation sending setting” 6-56“Must input next address key at broadcastsetting”6-50 “Printing page number at receiver” 6-56“Initial resolution setting” 6-51 “Call timer at memory sending” 6-56“Own number and name set” 6-51 “Date/own number print position setting” 6-56“Auto wake up print” 6-52 “Quick On-line sending” 6-57“Pause time setting” 6-52 “Recall in case of line busy” 6-57“Original print on transaction report” 6-52 “Recall in case of communication error” 6-57“Speaker volume setting” 6-52 Fax receive settings“Transaction report print select setting” 6-53 “Auto receive reduce setting” 6-58“Remote reception number setting” (onlywhen extension phone is connected)6-53 “Number of calls in auto reception” 6-59“ECM” (This setting is only effective if theother machine is a G3 machine thatsupports ECM)6-53 “Duplex reception setting” (only when theduplex module option is installed)6-59“Activity report print select setting” 6-54 “Print style setting” 6-59“Default exposure settings” 6-54 “Set the telephone number for dataforwarding”6-60“Distinctive ring detection” 6-55 “Output tray setting” 6-60“Disabling fax number direct entry” 6-55 “Anti junk fax setting” 6-60Fax polling security“Polling security setting” 6-61“Passcode number setting” 6-61“Set number of times public box may bepolled”6-62
